3D Printed Steamy Dragon Hatchling Mini Humidifier/Diffuser
Currently printed in the Yellow & White if you want a specific color that is not listed then please contact us.
Powered by a USB-C Cable (not included)
Size is approx. 140x1405x180mm
NexGen NZ Ltd own the full commercial licenses to print all the 3D models for sale on our site.
Maintenance & Warnings
Ensure you follow the aromatherapy oil safety directions
Only add 2-4 drops of aromatherapy oil.
Disconnect from the power source when not in use.
Always ensure the water tank is dry when not in use.
Clean the mist PCB regularly, once a week is recommended.
Use and store in a dry, ventilated area.
Ensure the diffuser is on a flat surface when in operation.
Use a soft cloth when cleaning the mist chip.
Don’t let water get into the air outlet when pouring or refilling.
Keep the diffuser out of reach from children and pets.
Keep the device away from heat-emitting machines like; heaters, tabletop cookers, electric burners, etc.
Please consult your physician before using if you have the following conditions:
Are asthmatic
Suffer from respiratory syndromes
Are prone to seizures
Have a history of stroke
Are pregnant or nursing
Our liability is limited to repair or replacement of the product(s) which are returned to us in the specified period. In no event shall NexGen NZ Ltd be liable for any direct, indirect, punitive, incidental, special, or consequential damages whatsoever arising out of or connected with the use or misuse of our products.
